Payment & Shipping Terms:
|Product Name:||MFC6090 Digital Flatbed Cutter||Scan Device:||Optical Sensor/CCD Camera|
|Effective Cutting Area:||600mm X 900mm||Body Frame:||With Stand|
|Control System:||Servo||Application:||On-demand Packaging And Sheet Card Cutting System|
digital paper cutting machine,
flatbed vinyl cutter
High Precision Die Cutting Machine Sample Box Packaging Flatbed Cutter MFC6090
Vicut Flatbed Cutter Plottter is using advanced digital contour cutting technology, it follows artwork cut lines drawn in Adobe® Illustrator® or CorelDRAW®, no cutting dies required for flatbed cutter, the sheets are produced to any shape, instantly and directly from the desktop. It can handle full cutting, half cutting, creasing, perforating and even drawing.
|Scan Device||Optical Sensor/CCD Camera||Optical Sensor/CCD Camera|
|Body Frame||Desktop (optional stand)||With Stand|
|Effective Cutting Area||450mm x 600mm(1.47x1.97ft)||600mm x 900mm(1.97x2.95ft)|
|Effective Contour Cutting Area||459mm x 611mm (1.51x2.0ft)||598 x 887mm(1.96x2.91ft)|
|Dual Cutting Head||Blade & Ball-bearing Creasing Tool (a calibration tool included)|
|Working Method||full cutting & kiss cut ,crease, perforate ,draw|
|Registration System||Advanced Registration Mark Sensing System (ARMS)|
|Cutting Software||DragonCut Pro|
|Working Mode||PC Control, Windows 64bit supported|
|Max. Cutting Speed||600mm/s-process 1 linear meter in 1.4 seconds|
|Max. down Force||510g|
|Max. Cutting Thickness||1.2mm|
|Media Fixture Method||
Vacuum suction with Vacuum Pump
(muffler is optional for MFC6090)
|Working Voltage||110V-240V optional|
|Working Environment||5 to 35 Degrees, no dust, flat working platform|
1. Contour cutter cuts thin films and card up to 500gsm / 600micron.
2. Pneumatic vacuum suction of media.
3. Dual cutting head, cutting and creasing in one compact unit.
4. Cuts typical SRA3 sheet in 30-60 seconds.
5. Servo drivers control. Silent, precise and powerful servo drives for best cutting results.
|1.||Vacuum Pump: Two different power pumps 400W and 750W available for 4560 model cutter and 6090 model cutter. One vacuum pump controls the whole working table. With a steel panel cover outside of vacuum pump, for less noise and good appearance. Muffler is optional for 750W vacuum pump.|
USB Connect PC: Input the file with USB line directly from cutting software in the PC, support 64bit Windows.
|3.||Emergency button: When it meet something wrong, first time put down this button, and it will stop working|
Application Field: Prototype and light production, on-demand packaging and sheet card cutting system – also suitable for sheet labels.
Process Material: cardboard, craft paper, plastic board, fibrous cardboard, rubber sheet and thin film etc.
PVC: Less than 0.4mm
Reflective Film: All types
Sandblast, Hard paper: Less than 450gsm
Magnetic Sticker: Less than 600micron
PET: Less than 0.3mm, vinyl, etc.
Contact Person: Vivien